Check out some similar questions!
Furnace with smart valve only stays lit for 5 seconds
[ 1 Answers ]
Have natural gas hot air furnace with honeywell smart valve SV9520H8067. Unit calls for heat and ignites OK but only stays lit for 5 seconds and goes out. Have had smart valve replaced 5 years ago. Does this sound like another smart valve problem?
Check a concord furnace smart valve?
[ 1 Answers ]
How do you check a concord furnace smart valve? Stat is calling. Green light on smart valve is on . But nothing takes place. There is 24 volts to the board on the w. check inducer motor. Its OK . With gas off at the gas cock valve inducer motor running glow coil got on 110 current, so is the smart...
Honeywell Smart Valve failure
[ 2 Answers ]
I have a Tempstar furnace and what is happening is the furnace will call for heat and the draft inducer motor will come on and after a momont I will hear the pressure switch go and nothing happens. The electric glow rod does not glow and the furnace does not fire but here is the catch the first...
AC/Heating - smart valve
[ 16 Answers ]
We have a home (PA) that only had electric heat when we purchased 7 years ago. Added central air-conditioning. A year later added central propane heating. The heating system "died" a couple of weeks ago. The service company replaced the control board and said it worked. It did not, and they...
Smart valve
[ 2 Answers ]
Hello, I have two questions. I have a Tempstar gas furnace that has a intermittent smart valve issue. It sometimes goes days and works fine and others, it will not open the main gas line. I get an orange glow from the ignitor, but the gas never comes on and the cycle ends after a few tries.... View more questions Search
Add your answer here.
|