Ask Experts Questions for FREE Help !
Ask
    thinhnguyen's Avatar
    thinhnguyen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 26, 2010, 03:30 PM
    Bryant furnace 310JAV
    When I install a new Bryant Furnace to replace the old one. I connect the vent pipe to the existing vent out to the roof. I noticed that water on the T-vent. I opened the elbow vent out from the machine and test for the flue. I got a lot of moisture from the flue. Is there any special ventilation requirement for this model?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 27, 2010, 08:52 AM
    You need to have a professional look over your install.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #3

    Feb 27, 2010, 11:19 AM
    Quote Originally Posted by thinhnguyen View Post
    When I install a new Bryant Furnace to replace the old one. I connect the vent pipe to the existing vent out to the roof. I noticed that water on the T-vent. I opened the elbow vent out from the machine and test for the flue. I got a lot of moisture from the flue. Is there any special ventilation requirement for this model?
    I really don't understand what you mean in this post But when you are getting moisture in the vent system it more that likely means that you vent is not vented right, maybe a four inch vent goiing into a six inch vent and the six inch vent can not get hot enough and the moisture in your exaust is condensing on the pipe.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Switch furnace to emergency mode on my Bryant 90 furnace [ 2 Answers ]

I have run out of propane and we are in the middel of a blizzard. How can I switch my furnace to emergency mode? Thanks, Brett

Bryant furnace [ 2 Answers ]

I have nine years old 80 BTU furnace.when I turn it on it start and shut down.if I open furnace door and start it works well.what is the problem?

Bryant furnace [ 0 Answers ]

My Bryant furnace doesn't do anything. The indicator light on the control board is on all the time, no fault code. New t-stat, new ignitor have followed all instructions inside panel. Does not fire. Model # 312JAV036070

Bryant Furnace Plus 80 [ 2 Answers ]

Hi Experts, Can you guys please give me hand? Here's my problem, I have Bryant Furnace Plus 80, it's about 8yrs old. It worked so great until last week, the digital thermostat went dead, it didn't show any numbers on the screen, I thought maybe it's dead, so I went to the store and bought a new...

View more questions Search