Ask Experts Questions for FREE Help !
Ask
    jeg's Avatar
    jeg Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 9, 2009, 06:26 PM
    Bryant furnace
    I have nine years old 80 BTU furnace.when I turn it on it start and shut down.if I open furnace door and start it works well.what is the problem?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Dec 9, 2009, 07:44 PM

    Have you changed the filter lately?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #3

    Dec 9, 2009, 07:54 PM
    Model #? Look for a status light on the front/blower panel. Blinking indicates trouble. Look for label with codes & instructions.
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant gas furnace CFM [ 7 Answers ]

How many CFM's are my furnace pushing. It's a 383KAV, 1/3 h.p. blower. Cooling is on the high tap and the heating is on the low tap. Thanks.

Bryant furnace [ 0 Answers ]

My Bryant furnace doesn't do anything. The indicator light on the control board is on all the time, no fault code. New t-stat, new ignitor have followed all instructions inside panel. Does not fire. Model # 312JAV036070

Bryant Furnace Plus 80 [ 2 Answers ]

Hi Experts, Can you guys please give me hand? Here's my problem, I have Bryant Furnace Plus 80, it's about 8yrs old. It worked so great until last week, the digital thermostat went dead, it didn't show any numbers on the screen, I thought maybe it's dead, so I went to the store and bought a new...

Bryant furnace hot air [ 2 Answers ]

The fan will not shut off unless I shut off the gas switch . Just changed the thermostat only cold air is coming out Any ideas

View more questions Search