Ask Experts Questions for FREE Help !
Ask
    Cole Nelson's Avatar
    Cole Nelson Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Dec 21, 2009, 04:44 PM
    Intertherm electric furnace
    I have a Intertherm central heat & air unit model number asco36bcraa and product date code 83JY-21-01 my problem is the blower will only run in the on position of the themostat when I put it to auto it does not run.the heating elements and the thermostat work as they should.so my question is why don't the blower work in auto on the thermostat?
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Dec 21, 2009, 05:02 PM

    Because the auto switch has frozen in the open position not allowing it to function properly. It needs replaced in order to have your furnace run properly. Any repairdude can do the repair in less than 1/2 hour once he has the right part.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intertherm electric furnace [ 1 Answers ]

Can anybody give me step by step instructions for where the furnace wires go from the furnace to the new 60 amp breaker kit for an intertherm electric furnace. Hooked this up yesterday and the furnace is not blowing out hot air only warm?

Intertherm Electric Furnace [ 3 Answers ]

The electric furnace makes clicking sounds (relays switching? ) and feels very warm to the touch, despite a thermostat setting of 60 deg F in July. The fan is set to AUTO and did not run at all. Are the relays shot and requiring replacement?

Intertherm electric furnace [ 3 Answers ]

I have an Intertherm electric furnace model MAC 2260A, serial # F000156739. It only blows cold air, so I am assuming the heating element has failed. I have had great difficulty finding a replacement. Any ideas where I can find one? Should I be looking at something else as the problem, as well?...

Intertherm electric central furnace [ 4 Answers ]

I have an Intertherm Central electric furnace model FEH-017H-C It has run perfect for years but lately the fan will not always start up. The thermostat clicks on the heater coils and after about 12 seconds the fan kicks in and circulates the warm air. Occasionally the thermostat clicks...

Intertherm electric furnace [ 1 Answers ]

I have an Intertherm E1EB-015HA electric furnace I recently had A/C Relay problems with it and since it is 10yrs. Old I thought I would just rebuild the whole thing. So I replaced the sequencers, limit switches, ac relay, transformer, and start capasitor, and installed a new digital non...

View more questions Search