Ask Experts Questions for FREE Help !
Ask
    warriorjoe78's Avatar
    warriorjoe78 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 21, 2008, 08:05 AM
    Intertherm electric furnace
    I have an Intertherm electric furnace model MAC 2260A, serial # F000156739. It only blows cold air, so I am assuming the heating element has failed. I have had great difficulty finding a replacement. Any ideas where I can find one? Should I be looking at something else as the problem, as well? :confused:
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 21, 2008, 10:52 AM
    Sounds like a mobile home unit.

    Post here under Intertherm and you will get a answer

    mobilehomerepair.com :: Index
    warriorjoe78's Avatar
    warriorjoe78 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 21, 2008, 11:37 AM

    Yes, it is a doublewide mobile home.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Nov 21, 2008, 11:39 AM
    Post at the link above
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intertherm Electric Furnace [ 3 Answers ]

The electric furnace makes clicking sounds (relays switching? ) and feels very warm to the touch, despite a thermostat setting of 60 deg F in July. The fan is set to AUTO and did not run at all. Are the relays shot and requiring replacement?

Intertherm electric central furnace [ 4 Answers ]

I have an Intertherm Central electric furnace model FEH-017H-C It has run perfect for years but lately the fan will not always start up. The thermostat clicks on the heater coils and after about 12 seconds the fan kicks in and circulates the warm air. Occasionally the thermostat clicks...

Intertherm electric furnace [ 1 Answers ]

I have an Intertherm E1EB-015HA electric furnace I recently had A/C Relay problems with it and since it is 10yrs. Old I thought I would just rebuild the whole thing. So I replaced the sequencers, limit switches, ac relay, transformer, and start capasitor, and installed a new digital non...

Intertherm electric furnace--is there a reset button anywhere? [ 4 Answers ]

My furnace quit working after a power outtage and I have tried and re-tried tripping and re-setting all the breakers a couple of times. I have shut all the buttons on the furnace off and back on as well. My question is this: Is there a reset button on it somewhere? :confused: I have been...

Intertherm 53,000btu electric furnace [ 1 Answers ]

The heating element turns on, and off in a few seconds, but the blower doesn't take off. Any suggestions would be appreciated.

View more questions Search