Ask Experts Questions for FREE Help !
Ask
    redroger's Avatar
    redroger Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2008, 07:37 AM
    Intertherm electric furnace
    Can anybody give me step by step instructions for where the furnace wires go from the furnace to the new 60 amp breaker kit for an intertherm electric furnace. Hooked this up yesterday and the furnace is not blowing out hot air only warm?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 23, 2008, 10:20 AM
    If you bought the kit you have the directions since they come in the box but if not I need the EXACT model number of the furnace and the exact model number of the kit so I can check my records for a diagram.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intertherm Electric Furnace [ 3 Answers ]

The electric furnace makes clicking sounds (relays switching? ) and feels very warm to the touch, despite a thermostat setting of 60 deg F in July. The fan is set to AUTO and did not run at all. Are the relays shot and requiring replacement?

Intertherm electric furnace [ 3 Answers ]

I have an Intertherm electric furnace model MAC 2260A, serial # F000156739. It only blows cold air, so I am assuming the heating element has failed. I have had great difficulty finding a replacement. Any ideas where I can find one? Should I be looking at something else as the problem, as well?...

Intertherm electric central furnace [ 4 Answers ]

I have an Intertherm Central electric furnace model FEH-017H-C It has run perfect for years but lately the fan will not always start up. The thermostat clicks on the heater coils and after about 12 seconds the fan kicks in and circulates the warm air. Occasionally the thermostat clicks...

Intertherm electric furnace [ 1 Answers ]

I have an Intertherm E1EB-015HA electric furnace I recently had A/C Relay problems with it and since it is 10yrs. Old I thought I would just rebuild the whole thing. So I replaced the sequencers, limit switches, ac relay, transformer, and start capasitor, and installed a new digital non...

Intertherm 53,000btu electric furnace [ 1 Answers ]

The heating element turns on, and off in a few seconds, but the blower doesn't take off. Any suggestions would be appreciated.

View more questions Search