Ask Experts Questions for FREE Help !
Ask
    aztinter's Avatar
    aztinter Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Nov 2, 2009, 09:23 PM
    Bypass off-balance switch on washer
    I have a Whirlpool washer model # gsx9885jq0 how do I bypass the off-balance switch. I have tested this part but before I spend the $95.00 I would like to make sure this is my problem.
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Nov 3, 2009, 07:18 AM

    When you say you tested it, what exactly did you see? How many wires go to the switch? It should be a simple matter to bypass, but in order to be sure, I'd like to know what you know so far.

    WallyH
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bypass ignition switch to start [ 3 Answers ]

How can you hot-wire or bypass ignition switch to start a MTD transmatic lawn tractor models 760-779

Ceiling fan speed switch broken how to bypass [ 1 Answers ]

The pull chain that operates the various speeds broke and the internal switch was not fixable there are three wires coming from the old switch 2 black wires one goes to the summer winter switch so remains the 2nd black and a blue wire that I need to connect to the internal wiring system Any...

? Safe to bypass vacuum switch to test furnace ignition? [ 3 Answers ]

I have two Amana 80 SSE IIO units. One just stopped igniting. The trouble indicator light was blinking 2x to indicate the vacuum switch was stuck closed. I made sure the tube was clear, and applied suction to the tube to and could hear the switch activate. The trouble light shows clear now....

Amana Washer "out of balance switch" [ 1 Answers ]

Can this switch be adjusted or bypassed? It is so sensitive on our washer that it requires constant rearrangement of the clothes to complete a wash. The washer is ten years old and a new switch is hard to find.

Kenmore washer out of balance [ 1 Answers ]

I have a 15 year old Kenmore 110.92273100. It has worked great, but lately has been shaking during regular loads to the point of moving across the floor. I have read the other posts, and the water balance ring is OK, the feet are level, the auto level on the back is fine, the kidney-shaped wear...

View more questions Search