Ask Experts Questions for FREE Help !
Ask
    ventracor's Avatar
    ventracor Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 8, 2009, 06:34 PM
    Ceiling fan speed switch broken how to bypass
    The pull chain that operates the various speeds broke and the internal switch was not fixable there are three wires coming from the old switch 2 black wires one goes to the summer winter switch so remains the 2nd black and a blue wire that I need to connect to the internal wiring system
    Any advice??
    Thankx
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Feb 10, 2009, 09:21 PM

    What make is the fan?

    Ceiling fan pull chain replacement and repair - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan (speed switch) [ 1 Answers ]

The chain on the fan switch broke of and I bought a replacement at HomeD. I forgot to tag the wires and can't seem to properly connect the 4 wire to the new switch. Cable colors are: White, Black, Yellow and Blue and the switch has an "L", #1, #2 and #3 where the cables should be connected....

3 speed ceiling fan, pull chain NOT broken, doesn't work! [ 2 Answers ]

I've read through about 100 questions/answers about the pull chain on a ceiling fan that turns on the fan (one pull), then controls speed by pulling the chain once for each speed reduction (3 speeds). My chain isn't broken. It just doesn't do anything when I pull it. I've read one response...

Ceiling fan speed switch [ 2 Answers ]

I removed the speed switch without marking which wires went where. It is a Hampton Bay. Any suggestions as to where a diagram or adivce can be found for the wires? Thanks in advance. Edie

3-speed ceiling fan switch repair [ 1 Answers ]

I replaced the pull chain on my 3-speed ceiling fan and forgot to write down the color coding of the wires going into the switch. The switch is marked 1,2,3,L. The wire colors are; black, orange, yellow, purple. Where to they go?

Ceiling fan speed switch [ 2 Answers ]

I have a ceiling fan that is approximately 20 years old. I took out the speed control switch, and thought I remembered where the wires went. The switch has two holes per connection. It has Line, 1 2, 3. Apparently I didn't put the wires back correctly. I only get two speeds - high and low. There...

View more questions Search