Ask Experts Questions for FREE Help !
Ask
    kileofames's Avatar
    kileofames Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 23, 2007, 07:41 PM
    Kenmore washer out of balance
    I have a 15 year old Kenmore 110.92273100. It has worked great, but lately has been shaking during regular loads to the point of moving across the floor. I have read the other posts, and the water balance ring is OK, the feet are level, the auto level on the back is fine, the kidney-shaped wear pads were replaced last year, the 4 springs are intact. I ran it with water only and it still shook although not as much with clothes. I'm at a loss what to try next. Could it be the motor or tranny? Could it be the springs look OK, but are too stretched and should be replaced with new tight springs?
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #2

    Mar 23, 2007, 07:59 PM
    You might want to try the following link:

    Home Problem Solver: Washing Machine Shakes, Vibrates, or Walks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washer [ 1 Answers ]

My kenmore washer makes a clicking noise when it goes into spin cycle. What is causing this?

Kenmore washer [ 1 Answers ]

We have drain problems with our Kenmore washing machine. It's a basic 2 cycle washing machine. Because of the elevation of our septic system the builders had to have the washer drain first into a pump tank which then pumps it up and into the exit drain for our septic system. Anytime that the...

View more questions Search