[retrans]

I have a Goodman AC unit. Recently my dog chewed the 18 awg wire ( red & white ) coming from the furnace to the unit in the yard. In the furnace the Y & C are the only two available places to re-connect the wires too. When I re-connect the wires ( w to y & r to c or vise versa) and put the panel back on the blower kicks in automatically while the thermostat is in the off position. What am I doing wrong?

[Joshdta]

Sounds like nothing. Is your fan on switch on the t-stat? Is it set to the off position? Some units have a 1 min 30 fan on period when power is restored.

[retrans]

sounds like nothing. is your fan on switch on the t-stat? is it set to the off position? some units have a 1 min 30 fan on period when power is restored.

The t-stat is in the off position. The blower kicks in when I put the panel back onto the furnace and it stays on. The blower will not shut off unless I shut it down at the furnace.

[Joshdta]

No wire is touching the g terminal is it? You may have a bad control board.

[retrans]

no wire is touching the g terminal is it? you may have a bad control board.

No nothing is touching the G terminal only the a green wire that's connected to it.

[Joshdta]

Take the red wire off the r terminal at the control board and try it see if the fan runs, this will elimnate the t-stat

[retrans]

take the red wire off the r terminal at the control board and try it see if the fan runs, this will elimnate the t-stat

I removed the red wire from the r terminal and the blower fired up when I put the panel back on the furnace

[Joshdta]

Sounds like the fan relay on the control board is stuck, or one of your limits or role out switches is out on you furnace, check them first.

[Joshdta]

http://www.mobilehomerepair.com/medi.../2940-3191.jpg

[retrans]

sounds like the fan relay on the control board is stuck, or one of your limits or role out switches is out on you furnace, check them first.

I'm not a technician. Where do I find the fan relay on the control board and how would I know if the roll out switch is stuck?

[Joshdta]

See the red buttons on the roll outs press them in and you will hear click if they are out. There could be as many as 5 on your furnace. Look to the left and right of the burners

[retrans]

see the red buttons on the roll outs press them in and you will hear click if they are out. there could be as many as 5 on your furnace. look to the left and right of the burners

I looked to the left and right and saw no red buttons. I also noticed that the red led light was solid it wasn't flashing.

[Joshdta]

What does it say for a solid red light on the back of your bottom door?

[retrans]

what does it say for a solid red light on the back of your bottom door?

Normal operations

[wmproop]

Have you blown the 3 amp automotive type push-in fuse that is in the circuit board?
While messing with the 24 volt wiring the fuse is easy to blow, and on a goodman furnace for some reason the blower will run all the time with the low-voltage fuse blown

[retrans]

have you blown the 3 amp automotive type push-in fuse that is in the circuit board?
while messing with the 24 volt wiring the fuse is easy to blow,,and on a goodman furnace for some reason the blower will run all the time with the low-voltage fuse blown

I will check to see if the fuse is blown

[retrans]

I will check to see if the fuse is blown

The fuse is not blown