Ask Experts Questions for FREE Help !
Ask
    JOHN KELLY's Avatar
    JOHN KELLY Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 11, 2007, 04:12 PM
    Wiring for goodman
    I Can't Figure Out The Wires From The Thermostat And The Wires In The Furnace Itself
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    May 11, 2007, 06:04 PM
    It is a heating and AC only or is it a heat pump with auxiliary heat, and is the heat gas or electric.
    ziadotabachi's Avatar
    ziadotabachi Posts: 1, Reputation: 1
    New Member
    		  
    #3

    May 9, 2008, 06:38 PM
    In the furnace you should have 5 terminals (wrgyc) the go to same in thermostate
    (wrgyc). Also from the furnace you have 2 wires going to the condenser, they should be terminated at y anc in the furnace. That should get you going. Try to use one heat one cool thermostat.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower motor wiring on a Goodman GMP [ 2 Answers ]

I have a Goodman GMP forced air furnace running on natural gas. It is about 5 - 6 years old. It recently went out. The draft inducer would come on and the igniter would glow but then it would shut down without opening the gas valve. I checked and found that the board was never sending a...

Goodman wiring [ 1 Answers ]

I Am Trying To Hook Up My Ac Unit From Kenmore With A Goodman Condenser And I Need Help With A Wiring Diagram

Goodman [ 2 Answers ]

I'm shopping for a new forced air furnace. The lowest price I have is for a high efficiency furnace made by Goodman. Never heard of this manufacturer. What is the quality rating for Goodman high efficiency furnaces? Thanks

Goodman Heater [ 1 Answers ]

We have a Goodman Heater, GMT Series, that recently started to sound like it is struggling to turn on. The LED blinks three times when it is struggling and the panel says that according to the blinking, we should check venter pressure switch or vent blockage. It was eventually starting and would...

Goodman furnace [ 2 Answers ]

My Goodman furnace will light and then go out. This will occur 3 times, then will quit running. The control board blinks 1 time and tells me to Check Gas flow, gas pressure, gas valve, and flame sensor. It seems to have gas going to the valve. Could this be a bad gas valve? Or a bad Flame...

View more questions Search