Ask Experts Questions for FREE Help !
Ask
    chuckar's Avatar
    chuckar Posts: 2, Reputation: 1
    New Member
     
    #1

    May 13, 2009, 11:37 PM
    Wiring a rth6400 to heat pump
    Old thermostat wiring w-w and y; r-r; g-g; y-o
    New wiring r-r; g-g; the w wire and y are where my problem is, does the w go to w and y and the y go too/b/
    dac122's Avatar
    dac122 Posts: 463, Reputation: 17
    Full Member
     
    #2

    May 14, 2009, 05:39 AM

    Make and model of old and new tstat and heat pump, please.
    chuckar's Avatar
    chuckar Posts: 2, Reputation: 1
    New Member
     
    #3

    May 14, 2009, 08:12 AM
    The old one is a honeywell round one with numbers on the inside of q539a1014 with 9043 below it. The new one is a rth6400 by honeywell.
    dac122's Avatar
    dac122 Posts: 463, Reputation: 17
    Full Member
     
    #4

    May 14, 2009, 09:36 AM


    Here's how I understand your wire map. Please correct or confirm.

    q539a1014 terminal -> wire color
    Code:
    w -> w
    w -> y
    r -> r
    g -> g
    y -> o
    Also post what brand HP you are controlling.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New heat pump old t-stat wiring [ 12 Answers ]

Moved in to a home that used to have a package heat pump unit that the owner sold, got a tempstar 3.5 ton with heat pump (ph5542akaz) hooked up all electric, but ran into trouble with old thermostat already installed (white rodgers-1f56n-444) have 6 wire in wall only 4 were hooked up. Can some one...

Wiring for heat pump [ 1 Answers ]

How do I wire a heat pum thermostat

Heat pump wiring [ 1 Answers ]

I have a heatpump and gas furnace and wirinmg up a new thermastat honeywell visionpro8000 and will not turn the heat pump on possible wiring wrong? Colors are y-g-r-w-b and the heat pump wires are y-w-r-b-o The thermastat has on it y2-l-e-aux-s1-s2- left side heat pump and right side Heatpump...

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

Heat pump thermostat wiring [ 1 Answers ]

I have pored over the thermostat wiring messages on this forum, but I still have a question. I am installing a RiteTemp 8085C to replace a Janitrol thermostat for my Goodman heat pump. The old thermostat was wired as follows: Red to R Orange to O Yellow to Y Green to G Blue to C White...


View more questions Search