Ask Experts Questions for FREE Help !
Ask
    Tribule's Avatar
    Tribule Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 22, 2009, 11:58 AM
    1990 honda civic won't start
    My 1990 honda civic won't start its getting fuel and spark and the starter is working fine it just won't start. Please help
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Mar 22, 2009, 01:03 PM

    . Test all underhood and underdash fuses with a test light or multimeter:

    https://www.askmehelpdesk.com/cars-t...tml#post252145

    . If the CEL comes on and goes off after 2 seconds, when the ignition switch is turned to ON, replace the Ignition Control Module and coil:

    https://www.askmehelpdesk.com/cars-t...tml#post265896
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1990 honda civic won't start when hot [ 1 Answers ]

My 1990 honda civic keeps reading code 6 when it warms to working temp. it only started a few days ago and only happens sometimes. But when It does happed if I park my car and turn it off it won't start again until I let it cool down. Once it is started it runs no problem. If anyone can help the...

1990 Honda Civic will not start [ 6 Answers ]

Hello, I have a 1990 Honda Civic that will not start. The radio works, battery is good, I have checked all fuses. I turn the key and the check engine light comes on for 2 seconds then goes off. I can here a relay click behind the radio first, the main relay click by the fuse panel. After...

1990 honda civic 1.5L will not start [ 12 Answers ]

I Have A 1990 Civic That Will Not Start. The Last Time That I Drove The Car It Was Fine. It Has Always Run Fine No Problems. I Have Changed Out The Igniter Unit And Replaced The Rotor Cap And The Distributor Cap. It Will Turn Over But It Does Not Seem To Fire Off. I Checked The Spark And...

1990 Honda Civic DX won't start [ 5 Answers ]

I have read all the strings on this subject but need a little more information. I am getting an error code 8 which means that the TDC sensor is problematic. My manual told me to check the resistance between the C and B terminals on the 6 pin TDC connector on the distributor. This turned out to be...

View more questions Search