Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Rheem Furnace Blower Stays On
[ 2 Answers ]
I have a Rheem Criterion II (Model RGPH 07NAMGR) with the main furnace blower that runs continuously. The IFC board (62-24084-82) is giving me the three blink error (middle green light between a green and orange bulb) which I believe indicates an open limit switch. I have check the three limits...
Blower stays on
[ 4 Answers ]
My blower fan on the inside unit stays on after thermostat cuts off.. I have a lenox model CB30M-312P.. INSTALLED 11/2004
Furnace Blower stays on too long.
[ 1 Answers ]
Hello. I have a Honeywell Electric furnace. Model # AR36-1 The blower stays on too long after furnace shuts off and cold air blows out. Any ideas how to fix it? Thanks.
Blower stays on
[ 1 Answers ]
I am working on a Tempstar furnace, Furnace blower comes on even thermostat is fully disconected from control board. Replaced control board and limit switch. Furnace still coming on. Checked all the wire locations. Tempstar model is - NFCX3600C1 Serial is- L001362305 Any...
Blower Fan stays on when it should not
[ 2 Answers ]
New Amana heat pump system: outdoor unit ASZ140481A, indoor unit (in attic) AEPF426016B + TXV. Thermostat: TotalTouch P286-200. When fan setting is FAN AUTO and the system is not cooling or heating, the fan can come on and stay on for hours, or the fan stays on after heating/cooling stops. The... View more questions Search
|