Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace Blower stays on far too long
[ 1 Answers ]
We have an older Tappan ANS Z21.47 furnace, circa 1979. When the cooler weather season started this year we turned on the heat and noticed that once the house had reached the correct temperature then the blower would remain on and blow cooler air for at least 20 minutes afterwards. We had read...
Blower stays on
[ 1 Answers ]
I am working on a Tempstar furnace, Furnace blower comes on even thermostat is fully disconected from control board. Replaced control board and limit switch. Furnace still coming on. Checked all the wire locations. Tempstar model is - NFCX3600C1 Serial is- L001362305 Any...
Furnace Blower stays on, no heat
[ 2 Answers ]
Hello, I have an older Bryant furnace model # 396gadd36075. I turned on the heat the other day and the no heat. I notice the unit had been turned off (pilot was not lit), apparently by the service company I use when they came to do the spring check for the AC. I followed the instructions to...
Furnace fan blower stays on too long.
[ 1 Answers ]
The fan blower for a coleman mobile home furnace stays on and begins to blow cold air before shutting off, how do I know if the fan/lower limit switches are the right ones? Model # 7680C856 80,000 BTU.
Blower Fan stays on when it should not
[ 2 Answers ]
New Amana heat pump system: outdoor unit ASZ140481A, indoor unit (in attic) AEPF426016B + TXV. Thermostat: TotalTouch P286-200. When fan setting is FAN AUTO and the system is not cooling or heating, the fan can come on and stay on for hours, or the fan stays on after heating/cooling stops. The... View more questions Search
|