Ask Experts Questions for FREE Help !
Ask
    Kozzmo's Avatar
    Kozzmo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 19, 2006, 06:56 AM
    Intertherm 53,000btu electric furnace
    The heating element turns on, and off in a few seconds, but the blower doesn't take off. Any suggestions would be appreciated.
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Nov 19, 2006, 09:44 PM
    Motor, sequencer, fan limit control or fan relay is probably bad.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat Wiring for Electric Furnace [ 2 Answers ]

I'm want to install the thermostat on our Electric Furnace. The wire leading to the furnace is a two wire (BLACK AND WHITE WIRES) It's heat only. The thermostat has a W and an R on the back of the stat. The furnace terminal has Y,W,O,C,G,F. The WO has a jumper between them? The W has a White...

Buzzing From Electric Furnace [ 2 Answers ]

I have a Trane heat pump system. As I tried the emergency heat position for the electric furnace, nothing happened but a "buzzing" sound. The tech was here twice and checked control panel, wiring, transformer, etc. Heat pump is fine... just when you turn on to emergency heat - inop. Tech was a...

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Blower on Intertherm Furnace [ 6 Answers ]

This is an older furnace.It works fine sometimes! I raised the tstat and nothing happened, I pushed the fan switch from auto to on and it worked-back to auto and it didn't work. When I checked the breakers and flipped them off and back on the blower started.Any idea where the problem may be? ...

View more questions Search