Ask Experts Questions for FREE Help !
Ask
    szholudev's Avatar
    szholudev Posts: 3, Reputation: 1
    New Member
     
    #1

    Nov 29, 2008, 10:35 AM
    Wrong furnace location
    Hello,

    I wonder if there is any limit (or standards?) in diffrence between basement and first floor temperature. My basement is 3 degree Celsius warmer than first floor due to very long heating line from one basement corner to another. It is 1 year old home with furnace installed in a wrong place (the most remote location from everywhere and builder claims it complies with building code) and I am trying to compel builder to reinstall home heating correctly.

    Any suggestions are greatly appreciated.

    Sergey.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Nov 29, 2008, 01:48 PM
    You will have to research YOUR local codes. They change from area to area. The only place you cannot install a furnace is under the steps going upstairs and that code could be nonexistant anymore since the units are high efficiency or heap pump electric heat.Very little risk of fire.

    BTW the basement is NOT required to be heated by code. Only finished living area.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Location of reset on janitrol furnace [ 4 Answers ]

We are getting colder... please recommend places to look for a reset button on janitrol furnace. Any help would be appreciated.

Location of furnace and water heater [ 2 Answers ]

Hello Help Desk, I am considering buying this brand new house. It's a good size house. The builder has told me that there are two furnaces for the house, one is located in the attic and the other is in the crawl space. The water heater is also in the crawl space. I am assuming that these...

Location of Model # of Criterion 2 Furnace [ 1 Answers ]

I have nearly stripped the unit to the frame and cannot find the model # of my Criterion 2 Furnace. Its not on the doors either. I thought that it would have a plate somewhere.

Location of Ignitor in Carrier Furnace [ 2 Answers ]

This is my first winter in a new home... furnace is a Carrier Weathermaker 8000 58WAV from 1993. A couple of days ago my ignitor went bad, I bought a new ignitor for this model but to my surprise when I opened the unit I found that the bad ignitor (which was not the same as the correct...


View more questions Search