Ask Experts Questions for FREE Help !
Ask
    Dzehnle5's Avatar
    Dzehnle5 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 13, 2008, 10:09 AM
    Location of reset on janitrol furnace
    We are getting colder... please recommend places to look for a reset button on janitrol furnace. Any help would be appreciated.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 13, 2008, 11:17 AM
    Reset for what? Is this a oil furnace? More info needed.
    Dzehnle5's Avatar
    Dzehnle5 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 13, 2008, 11:22 AM
    Gas furnace
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Jan 13, 2008, 11:57 AM
    I know of no reset for a Janitrol gas furnace. If there is one it might be on the high limit control. Look for a circular control as big as a quarter with wires attached.. There might be a red reset button in the center. Your furnace might not have this device. Careful. Turn off power before you hunt for the part.
    startdustb's Avatar
    startdustb Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Nov 27, 2012, 08:04 PM
    There are three reset switches there is one above the burners an they are as big as a dime an the other two are on each side of the burners an yes turn off power may not want your arm to be set a fire if it lights
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Where do I find a reset button for Janitrol Model GMP100-4 [ 1 Answers ]

My furnace is out and this has happened before... it just needed to be reset. I need help locating the reset button on Janitrol model GMP100-4, serial #9403029893... can anyone help? Where is a reset button usually located on a furnace?

Janitrol furnace will not ignite from thermostat [ 7 Answers ]

I have a Janitrol furnace, that I believe to about 50 yrs. Old, model # FEC 120-84, type D. When I turn the thermostat on, the pilot light will not ignite the burners. I then go to the furnace and trip a microswitch that appears to be wired to a thermocouple and activated by a rod that goes from...

Janitrol Condensing Furnace Igniter [ 1 Answers ]

Hello, What would cause an igniter glow plug to try and light the gas when the cooling is running? I had a problem with a clogged condensing drain and was leaking water out of the overflow drain next to the condensate line, this water made it's way down through the furnace to the floor. The...

View more questions Search