Ask Experts Questions for FREE Help !
Ask
    petek's Avatar
    petek Posts: 2, Reputation: 1
    New Member
     
    #1

    Apr 28, 2008, 07:02 AM
    Location of Model # of Criterion 2 Furnace
    I have nearly stripped the unit to the frame and cannot find the model # of my Criterion 2 Furnace. Its not on the doors either. I thought that it would have a plate somewhere.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Apr 28, 2008, 11:35 AM
    Usually the plate is in the area right in front of the unit on the metal wall where some burner controls etc are mounted. Could be someone removed it.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Criterion 2 Furnace [ 1 Answers ]

I have a Criterion 2 Furnace with a Rheem SEER 12 A/C unit. Is the furnace considered a multi-stage unit? I bought a Lux tx9000ts digital programmable t.stat and it states that it will not work on a multi-stage unit.Previous home owner lost all manuals and I can't find any concrete info. Thanks.

Location of the flamer sensor in a Bryant Model 383K Furnace [ 3 Answers ]

Where is the exact location of the flamer sensor in a Bryant Model 383K Furnace? Is there a better diagram than I currently have in my user's manual? It is really for the installer. I know that I need to sand down/ steel wool the flame sensor, but can't remember the location. Thanks in...

Furnace rheem criterion [ 1 Answers ]

Furnace blower fan and the pre blower fan come on at same time. And the ignitor won't light. Have to turn off power switch to stop both fans. I changed upper limit swith but still won't work. When it was working it was going great, returned and blower was running only but no heat. Thermostat...

Rheem criterion II gas furnace [ 1 Answers ]

It is now about 57 degrees in my house. My furnace just turned on but there was no ignition, no flame. I could hear the blowers running. Is my flame sensor bad or dirty? Or is it something else? How do I fix this? I have fixed my furnace before with a new flame sensor or something like that. I...

Rheem criterion furnace [ 3 Answers ]

My air went out yesterday and I don't what to do... the motor outside is not working but the inhouse fan is work air is coming out of the vent but it is not cool. This happened in the winter and we had the heat ignaitor replace... help?? it 98 degree today


View more questions Search