Ask Experts Questions for FREE Help !
Ask
    IMjamin's Avatar
    IMjamin Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 7, 2008, 07:26 PM
    Kenmore 110 washer will not turn on-but light works
    The kenmore 110.92195810 top loading eletronic fabric care washer will not turn on. The breaker works because the floresent light on the washer works. The digital interface will not power up to give me sign of life. It stopped when the washer was full of water. I have not drained it yet. Is there a reset switch on the washer, or a fuse that has blown inside the washer. It is in a difficult place to pull out and work on. The faucet is on and the drain (appears) to be working. I started it on a soak cycle. And then nothing.
    IMjamin's Avatar
    IMjamin Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Mar 16, 2010, 08:13 PM
    I fixed this by opening up the top of machine to expose the electronics. I found that the 12 volt (or 24 I can't remember) power supply had touched the back of the washer and had blown the solder from the board. I re-sodlered (I can't spell) the power supply to the board and it worked after that. Now I have another issue, it will not spin. The washer turns on but I have to purposely push the spin button.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washer only works in heavy duty and delicate [ 1 Answers ]

Kenmore clothes washer 110.92596100 only works correctly when the Wash Action Control switch is in the Heavy Duty position. When switched to any other Wash Action position, the washer works in the delicate mode only, so right now I only have 2 modes. Any help in diagnosing so I can get the right...

Remote works, light works, fan humms does not turn [ 2 Answers ]

Hello, I have a Hamton Bay fan with a remote/no pull chain. The light on the remote comes on and does properly operate the light on the fan. It also turns on and off a humming noise but there is no movement from the fan itself. Of course, the house did not come with an owners manual. Is...

Kenmore washer won't fill with water, but rinse works [ 1 Answers ]

Help! My kenmore washer won't fill with water during the wash cycle, but the rinse and spin cycle seems to be working fine. When I turn the knob to "wash" nothing happens. Even my handy man father was stumped on this one!! Can anyone help?

Kenmore washer won't agitate all else works [ 3 Answers ]

I have a kenmore model #82380100 Model Super Duty 88 that will not agitate. All else works on the machine, just won't agitate.

Kenmore washer no water but aggitator works [ 1 Answers ]

I have a Kenmore 90 model #110.20922990 top load washing machine. I have had no trouble until today. I finished a load as normal. Now the next load, the water will not enter the machine. The machine starts right into aggitation as if it had water. I am assuming it is the "water pressure switch"? ...

View more questions Search