The kenmore 110.92195810 top loading eletronic fabric care washer will not turn on. The breaker works because the floresent light on the washer works. The digital interface will not power up to give me sign of life. It stopped when the washer was full of water. I have not drained it yet. Is there a reset switch on the washer, or a fuse that has blown inside the washer. It is in a difficult place to pull out and work on. The faucet is on and the drain (appears) to be working. I started it on a soak cycle. And then nothing.

I fixed this by opening up the top of machine to expose the electronics. I found that the 12 volt (or 24 I can't remember) power supply had touched the back of the washer and had blown the solder from the board. I re-sodlered (I can't spell) the power supply to the board and it worked after that. Now I have another issue, it will not spin. The washer turns on but I have to purposely push the spin button.