Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring a basement
[ 3 Answers ]
I am trying to finish my basement and was thinking of doing some of the wireing myself then bring in a electricion. In the living room I plan to have six plug in's. Also there will be a large walk in closet in that room with a plug in. then in the next room I plan to have two plug in's not...
Basement wiring
[ 15 Answers ]
Hi all, I am new to this forum and I appreciate any direction you can offer. I live in Farmington MI and have a mess in my basement. The person that put the wiring in did not use junction boxes, just wire nuts and tape everywhere. Anyway the whole basement is on one circuit. If I pull the...
Basement wiring
[ 1 Answers ]
I am getting ready to wire my basement. In the basement there will be 3 gfi outlets, 8 outlets and two ceiling lights. Also in addition to the two ceiling lights in the finished area I want to put two pull chain lights on a switch. My question is will 12/2 wire be heavy enough to wire everything....
Wiring basement
[ 1 Answers ]
I am using metal studs in my basmsnt. I positioned each outlet 18inches on center from floor. I purchased the grommets and am ready to start fishing the wire. Can I use the hole in the stud located 5 inches lower than each outlet location in order to save wire? That is, the next available hole...
Wiring basement
[ 2 Answers ]
I am wiring a finished basement. The problem is the main panel is in the Gar 200a service. This is abour 65 ' away from the finished basment. I was going to run 2 20 amp breakers for the basement room.. it will have lites, frig, entert. Center etc. My question is I want to run a 50 amp... View more questions Search
|