Ask Experts Questions for FREE Help !
Ask
    willys55's Avatar
    willys55 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Nov 1, 2007, 10:01 AM
    Changing out a goodman thermostat to a hunter
    I am trying to change my goodman thermostat (CHT18-60) to a hunter 44155C. The goodman wired up this way:

    Red - R
    Green - G
    White - W
    Blue - 2

    I know the red is the hot from the transformer, green is the fan, white is for the heat and blue is for the cooling.

    The problem I have is that when I hook it up to the hunter, the only thing that wants to work is the cooling. I need to know which wire actually goes where.

    The markings on the Hunter thermostat is:

    G - Green
    RC - RC and RH are jumpered
    RH
    Y/O
    W/B
    Y1

    I know these to wires should go here, the other 2 should go to W/B and Y1, but this only lets the a/c run not the heat.

    Can anyone help out here?

    Thanks
    hixton's Avatar
    hixton Posts: 146, Reputation: 5
    Junior Member
    		  
    #2

    Nov 2, 2007, 08:28 PM
    The red should go to rh&rc white should go to w green should go to g yellow or blue should go to y
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Nov 2, 2007, 08:33 PM
    I`m sorry, I guess its just my luck but I wouldn`t trade a goodman thermostat for 10 hunter stats,, have had a lot of nothing but bad luck with hunter
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing from a trane thermostat to a hunter [ 1 Answers ]

I have a trane 3aat80b1a1 thermostat with 8 terminals r,t,o,g,y,x2,b and f. I want to install a hunter 44155c thermostat with 6 terminals g,rc,rh,y/o,w/b and y1. Rc and rh have a jumper. How do I match up these terminals. thanks, robert

Changing from a Rudd to a Hunter thermostAT [ 1 Answers ]

I bought a hunter 44360 digital thermostat to replace a Rudd. The Rudd was wired Y-Yellow, G-green, E-White, R- Red, B-Blue, and a brown on X. The Hunter has G, RC, RH, Y/O, W/B and Y1. I can't seem to get the outside fan to run. Also before changing the thermostat, the blower fan constantly...

Changing from a Rudd to a Hunter thermostAT [ 2 Answers ]

I bought a hunter 44360 digital thermostat to replace a Rudd. The Rudd was wired Y-Yellow, G-green, E-White, R- Red, B-Blue, and a brown on X. The Hunter has G, RC, RH, Y/O, W/B and Y1. I can't seem to get the outside fan to run. Also before changing the thermostat, the blower fan constantly...

Problems changing to digital thermostat (Hunter 33260) [ 1 Answers ]

I'm pretty good about reading other posts and I just couldn't find an answer for my situation... I bought my house last year in Arizona (very very hot now) and the thermostat looked like the same one from when the house was built 20-25 years ago. Deciding to do a cheap upgrade I purchased the...

Hunter Ceiling Fan Randomly Changing speeds. [ 17 Answers ]

I have a hunter Jackson Square ceiling fan on a wall remote kit that came with the unit. It randomly powers on and off and changes speeds. I have changed the frequency on the remote and receiver multiple times and it still does this. The house was prewired for this when I purchased the house so...

View more questions Search