I am trying to change my goodman thermostat (CHT18-60) to a hunter 44155C. The goodman wired up this way:

Red - R
Green - G
White - W
Blue - 2

I know the red is the hot from the transformer, green is the fan, white is for the heat and blue is for the cooling.

The problem I have is that when I hook it up to the hunter, the only thing that wants to work is the cooling. I need to know which wire actually goes where.

The markings on the Hunter thermostat is:

G - Green
RC - RC and RH are jumpered
RH
Y/O
W/B
Y1

I know these to wires should go here, the other 2 should go to W/B and Y1, but this only lets the a/c run not the heat.

Can anyone help out here?

Thanks

The red should go to rh&rc white should go to w green should go to g yellow or blue should go to y

I`m sorry, I guess its just my luck but I wouldn`t trade a goodman thermostat for 10 hunter stats,, have had a lot of nothing but bad luck with hunter