Ask Experts Questions for FREE Help !
Ask
    Morex's Avatar
    Morex Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 4, 2007, 02:39 AM
    Briggs & Stratton 10 hp lawn mower engine?
    Just wondering if the flywheel should be in contact with the starter at all times as it appears to be! It has eaten the flywheel gear off! Stupid nylon gear! Is there any after market alloy type replacement?

    Numbers off engine plate

    Model 28a707
    Type 0113-01
    Code 951103za
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Oct 5, 2007, 10:50 AM
    Quote Originally Posted by Morex
    just wondering if the flywheel should be in contact with the starter at all times as it appears to be! It has eaten the flywheel gear off! stupid nylon gear!! is there any after market alloy type replacement?

    numbers off engine plate

    model 28a707
    type 0113-01
    code 951103za
    No, the flywheel should not be in contact with the starter bendix gear at all times. The nylon gear can be replaced with another nylon gear. You may need to lube the shaft to see if the old gear will get to where it will go up and down. If the center shaft is messed up on the corkscrews, then replace the whole starter. If the shaft appears o.k. replace the bendix gear (nylon) and cap.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

20 hp Briggs and Stratton engine won't start -TroyBilt mower [ 4 Answers ]

I have a Troy Bilt riding mower and it won't start. The battery has been checked. I think it's the starter. Anyone know how to change the starter?

12.5 HP Briggs & Stratten Lawn Mower Engine [ 2 Answers ]

Hi- I have a strange problem with this engine. It starts and runs fine most of the time. But, every now and then it starts to smoke, lots of smoke out the muffler. The only way I can get it to stop is turn the engine off. It get into the carburetor through the Positive crankcase ventilator. I...

12.5 briggs&stratton engine [ 1 Answers ]

I have a briggs &strattonengine in my ride on lawn mower the battery won't charge when the engine is running

Lawn Mower Cord Replacement - Briggs and Stratton [ 1 Answers ]

I am trying to replace the cord of my MTD Machine/Briggs an Stration engine. After poping the cover guard off, there appears to be 4 screws holding in the enclosure containg the cord. The screws do not appear to be those that can be loosen with a flat, phillips screwdrivers or allen wrench. What...

View more questions Search