Ask Experts Questions for FREE Help !
Ask
    Larry Erickson's Avatar
    Larry Erickson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 8, 2012, 07:34 AM
    White rodgers 50a50-241 manual
    Hi
    My Luxair with white rogers 50a50-241 control when running the fan in manual for A/c sometimes the fan seems to puslate like trying to start , if I shut it down and let it rest it seems to be normal. Could the run cap be bad?
    Lites's Avatar
    Lites Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jul 16, 2012, 10:27 AM
    Quote Originally Posted by Larry Erickson View Post
    Hi
    My Luxair with white rogers 50a50-241 control when running the fan in manual for A/c sometimes the fan seems to puslate like trying to start , if I shut it down and let it rest it seems to be normal. Could the run cap be bad?
    Thank you for your interest with Emerson White- Rodgers. My name is Joselito Laxamana from technical department. Try to isolate the issue by bypassing the thermostat operation by putting a jumper between the R and G terminal. Then check the reading coming off the board going to your blower you should have there 120 VAC. If feed is present still the fan is not turning on then contact Luxair to troubleshoot the fan. Let me know if you need anything else or you can contact me directly at 18002842925.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

White rodgers 50a50-241 7 flash error code>>> [ 21 Answers ]

I have a York Furnace natural gas with a white rodgers 50a50-241 board, After no heat just blowing cold air I shut off the system let it sit for about 5 minutes and turned back on... worked fine for 3 days. Now it give me 7 flashes from the board after 3 tries at lighting on its own. Ignitor burns...

How do I find a wiring diagram for White Rodgers 50A50-241 [ 1 Answers ]

I nedd to find a web site that I can download a wiring diagram for a York AC & heating unit with a White Rodgers 50A50-241 Thanks, Paul:rolleyes:

White-rodgers 50A50-241 board not supplying power to inducer motor [ 0 Answers ]

I checked fan manually with jumper wires to plug and fan worked. Just wouldn''t work plugged in and safety switch closed on door.

White rogers 50a50-241 [ 1 Answers ]

I get lockouts about every two weeks and have to clean the sensor again .Bad board?

White Rodgers 50A50 - 241 [ 1 Answers ]

My heater isn't blowing warm air. It doesn't appear to be igniting. What is the normal voltage output of the igniter wire?

View more questions Search