Ask Experts Questions for FREE Help !
Ask
    gsoberg's Avatar
    gsoberg Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2010, 11:48 AM
    White rogers 50a50-241
    I get lockouts about every two weeks and have to clean the sensor again .Bad board?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 10, 2010, 12:27 PM
    If cleaning the sensor allows the unit to work again then

    The sensor might be tired.

    The wire connecting the board to the sensor mignt be defective OR you might try trimming the ends of the wire and reattach for a better signal.

    GOT a meter test below.
    Attached Images
  1. File Type: pdf Doc1.pdf (42.4 KB, 208 views)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

White rodgers 50a50-241 7 flash error code>>> [ 21 Answers ]

I have a York Furnace natural gas with a white rodgers 50a50-241 board, After no heat just blowing cold air I shut off the system let it sit for about 5 minutes and turned back on... worked fine for 3 days. Now it give me 7 flashes from the board after 3 tries at lighting on its own. Ignitor burns...

How do I find a wiring diagram for White Rodgers 50A50-241 [ 1 Answers ]

I nedd to find a web site that I can download a wiring diagram for a York AC & heating unit with a White Rodgers 50A50-241 Thanks, Paul:rolleyes:

50a50-241 controller [ 1 Answers ]

Flashes five times but high limit is good

White Rodgers 50A50 - 241 [ 1 Answers ]

My heater isn't blowing warm air. It doesn't appear to be igniting. What is the normal voltage output of the igniter wire?

Controller 50a50-241 [ 2 Answers ]

My heat system which made by white-rogers model 50A50-241 is has lockout problem. I am getting cool air 99.99%. It works then go next time lockout mode any help please? Thanks:confused:

View more questions Search