Ask Experts Questions for FREE Help !
Ask
    Dangdry's Avatar
    Dangdry Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 19, 2012, 08:49 AM
    Removing the back panel to a maytag washer
    How so I remove the back panel to my Maytag top loading clothes washer?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    May 20, 2012, 12:21 PM
    It depends on what you want to do. Here is a manual: http://dl.dropbox.com/u/8010163/Mayt...hers%20MAV.pdf
    I generally start by removing screws that are around the edges. The problem is that things like the water valves are attached.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Opening the front panel of Maytag washer [ 3 Answers ]

Does the front panel of Maytag washer MAV5000AWW open so I can get to the plastic hoses where the water drains from washer tub? Please explain how to open

Removing Maytag washer door boot spring [ 1 Answers ]

I have a Maytag Model MAH6500AWW with a door boot that has a slit cut into it and leaks. I can disassemble the machine down to the point of removing the tub spring that applies tension to the boot cable holding the door boot onto the tub. There is a lot of tension on that spring. How do you...

Rear panel replacement on Maytag washer MTW5700TQ0 [ 1 Answers ]

I replaced the drain hose on my Maytag MTW5700TQ0 washer. The rear panel was very difficult to remove because of two clips that slide up into slots on the back panel and hold it tight to the frame. This mechanism seems to hold the entire frame together. I now need to move the washer to a new...

View more questions Search