Ask Experts Questions for FREE Help !
Ask
    cblum's Avatar
    cblum Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Sep 28, 2010, 08:55 AM
    Tempstar
    We need a rollover switch for our Tempstar a/c-heating furnace
    cblum's Avatar
    cblum Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Sep 28, 2010, 08:57 AM

    We need a rollover switch for our Tempstar a/c-furnace approx. 12 yrs old
    cblum's Avatar
    cblum Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Sep 28, 2010, 09:01 AM
    Quote Originally Posted by cblum View Post
    We need a rollover switch for our Tempstar a/c-furnace approx. 12 yrs old
    We have no serial number etc
    cblum's Avatar
    cblum Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Sep 29, 2010, 07:10 AM
    Quote Originally Posted by cblum View Post
    We need a rollover switch for our Tempstar a/c-furnace approx. 12 yrs old
    Model #PGAA 30dlK6 PGAA30dIK

    Serial #L98089 54840
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tempstar furnace [ 0 Answers ]

My tempstar furnace blower motor won't stop running the furnace doesn't have a circuit board or fuse but the gas valve flame is very high could the problem be the gas valve,relay or thermal couple?

Tempstar furnace [ 1 Answers ]

I have a Tempstar 5000 furnace SERIAL 1002612a whenever I turn it on it ignites I see flames an then it just goes out. What's THE PROBLEM:mad::mad::eek:

Tempstar A/C [ 4 Answers ]

Any input about the 13 seer Tempstar R410 Heat pump system? I am building a new house and want to make sure it is a good brand.

Tempstar experts? [ 2 Answers ]

Blower stay on even thermostat is disconnected at the board. Replace board but it's still doing the same thing.

Tempstar 5000 [ 3 Answers ]

I have changed the coil because it looks like it had a spark or got hot because there was black soot on the power terminals so I replaced it but it still doesn't work. When you turn it on there is a small hum the magnets are not being pulled in, when you push them in humming gets louder from the...

View more questions Search