 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a tempstar 5000 high efficiency furnace and the burners ignite and the heat goes on but it is getting hot and the rollout switch is shutting the furnace off and the fan continues to blow until you reset the switch. Does anyone have any ideas what may be causing this. I have had numerous...
My father in law gave us a tempstar high eff. 5000 which is old. Just had a brand new 96.6 percent eff. Luxaire 100,000 BTU furnace installed recently,and was just wondering if at all could be installed along with the unit he gave to us?
I have a gas Tempstar furnace , The pilot ignites but the furnace does not it tries a few times then stops. The blower works . What might the problem be?
Any input about the 13 seer Tempstar R410 Heat pump system? I am building a new house and want to make sure it is a good brand.
My tempstar furnace burners light and then turn off, light and turn off, they cyle about every 3-5 seconds, when they should burn continuously. What is the problem?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
