Ask Experts Questions for FREE Help !
Ask
    joem2835's Avatar
    joem2835 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 27, 2007, 03:07 PM
    Changing over burners from nu-way to giersch g 20
    Having changed burners ,how do I match up the four wires (not colour coded ) from the old thermorossi RT22 boiler to the new GIERSCH G20? Any ideas?
    JOE
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 27, 2007, 04:02 PM
    You must not be in the USA. I suggest calling the manufacturer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Burners come on, go off, come on, then they go away [ 3 Answers ]

Hi folks. I've got a problem with a Goodman GPG13 gas pack unit. When a call to heat is given all seems to work fine but the burners come on for a short time then some go off and come back on but after a while (a couple minutes) they all go off. And they stay off for the lock out time ~ I'm...

Why will my burners not stay lit [ 1 Answers ]

My forced air furnace does not stay lit when the heat is turned on. I climbed into the attic where it is located and had my wife set the thermostat to heat. I observed the burners light and watched the Honeywell limit switch start to do it's thing but after about a minute the limit switch...

Main burners never ignite [ 1 Answers ]

Lennox G20 Series gas furnace - Igniter works, ignition flame is starts, but the main burners never ignite. Blower fan starts after appropriate period. What is wrong?

Gas stove burners [ 2 Answers ]

I have a magic chef gas stove. It is about 8 years old. About a year ago the two high speed burners quit lighting. And now only one of the burners will light. You can light them with a match. And after they are hot the other three igniters will light them short term

Burners won't stay lit [ 2 Answers ]

-- need more help in figuring out flame sensor or roll out switch - Weather King --- ICECO --- 80 PJ --- forced air --- Honeywell valve (on/off switch)---burners light for 1 or 2 seconds, then go out

View more questions Search