Ask Experts Questions for FREE Help !
Ask
    utilityguy's Avatar
    utilityguy Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 28, 2007, 11:30 AM
    Gas stove burners
    I have a magic chef gas stove. It is about 8 years old. About a year ago the two high speed burners quit lighting. And now only one of the burners will light. You can light them with a match. And after they are hot the other three igniters will light them short term
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jan 28, 2007, 02:02 PM
    The "pilot light" need to be checked and cleaned. You probably will find two pilots on afour burner stove. There is usually a small tube runnign from the light to the burner. Clean out the inside of each tube by pushing a small rag through it with a pencil. Don't just try to blow air through it.
    utilityguy's Avatar
    utilityguy Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 28, 2007, 02:58 PM
    Quote Originally Posted by ballengerb1
    The "pilot light" need to be checked and cleaned. You probably will find two pilots on afour burner stove. There is usally a small tube runnign from the light to the burner. Clean out the inside of each tube by pushing a small rag through it with a pencil. Don't just try to blow air through it.
    My stove uses electric igniters for each eye... there is no pilot light
    Thanks though
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GE gas stove F7 error [ 1 Answers ]

Where is the board on this gas stove GE Spectra Profile XL44. I need to remove the board and use an eraser on the contacts. The F7 error message comes up with a beeping noise. Someone fixed this before this way but I wasn't there to see where it was. Thanks Bryan

Burners won't ignite--no gas? [ 1 Answers ]

Lennox model GMP075-3. Installed in '95. I've tried resetting according to instructions on access cover panel (turn heat to 'off', turn off power to furnace, turn gas valve to 'off' for 5 minutes, etc.) When I call for heat, small (induction?) fan runs for a few seconds, the igniter unit glows...

Old Gas Stove [ 1 Answers ]

I just moved into an apartment with a match-light oven. Can someone tell me how to light it? Thanks! Eric

View more questions Search