Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
2 Piece toilet rubber gasket leaks
[ 3 Answers ]
I found that the water was leaking from my tank, so I changed the rubber gasket which seals the nuts and bolts between the tank and the toilet base. When I tightened the bolts, I was cautious and hand tightened them to a snug fit, but I didn't tighten as tight as I could (fearing that I may crack...
No caulk shower drain compression gasket too high
[ 2 Answers ]
Hey everyone, My wife and I moved into an older home and have been wanting to renovate for a while. We decided to begin this spring with our daughter's bathroom. Took out the old tub and are trying to replace it with a shower. We got a plumber to come out and re-do the hot/cold pipes and...
New flush valve-- toilet tank now wobbles on rubber gasket
[ 4 Answers ]
I just put new "guts in two toilets--fill and flush valves. Now the toilet tank doesn't want to "sit" on the bowl. It wobbles a bit with the new rubber gasket as fulcrum. What did I do wrong? Thanks
How to replace rubber seal on valve cover gasket bolts
[ 1 Answers ]
Replacing valve cover gasket on 2001 honda civic. Trying to replace rubber seal on cover bolts and cannot get them on. Need help getting on..
Rubber gasket for the thermal coupler in our water heater...
[ 1 Answers ]
How important is the thermal coupler igniter wire rubber gasket? We replaced the thermal coupler and the orange rubber gasket crumbled. I put everything back together (except for the gasket) so that we can take showers, but my wife is concerned, since the water heater is out in the garage, and... View more questions Search
|