 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rubber gasket for the thermal coupler in our water heater...
How important is the thermal coupler igniter wire rubber gasket? We replaced the thermal coupler and the orange rubber gasket crumbled. I put everything back together (except for the gasket) so that we can take showers, but my wife is concerned, since the water heater is out in the garage, and our daughter lives in the apartment above the garage...
Thank you... |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
If a thermal coupler is bad and the furnace is coming on loud upon the startup of the flame, can it also produce carbon dust buildup?
Are there instructions for replacement of thermal coupler for gas water heater with closed system with only a window to see the pilot light. Looks like there are screws to take apart the area of the burner.
Are there instructions for replacement of thermal coupler for gas water heater with closed system with only a window to see the pilot light. Looks like there are screws to take apart the area of the burner.
I have a gas fireplace that I just replaced the thermal-coupler on. I'm still having the same problem that when it cycles on, it will be on a very low setting, go on for about 30seconds then go out again;pilot and all. Could the control knob be bad or possibley the thermostat? Or could it be the...
I have a Hotpoint brand gas water heater. First off all Hot point doesn't release any parts to anyone so you have to have the parts they have overnighted to you. No big deal really if the actually overnight it which they didn't. Anyway, I need my thermal release valve replaced. Any do it...
View more questions Search
|
