Ask Experts Questions for FREE Help !
Ask
    canoy82's Avatar
    canoy82 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 12, 2012, 12:35 PM
    How to replace rubber seal on valve cover gasket bolts
    Replacing valve cover gasket on 2001 honda civic. Trying to replace rubber seal on cover bolts and cannot get them on. Need help getting on..
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Apr 13, 2012, 05:15 PM
    I'm not really sure what problem you are facing. The rubber seals fit under the washers and are torqued 7 lb.-ft. (84 lb.-in.).
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New flush valve-- toilet tank now wobbles on rubber gasket [ 4 Answers ]

I just put new "guts in two toilets--fill and flush valves. Now the toilet tank doesn't want to "sit" on the bowl. It wobbles a bit with the new rubber gasket as fulcrum. What did I do wrong? Thanks

How to take a drain out of a bathtub to replace the rubber ring seal [ 2 Answers ]

I think the tub is leaking from the drain and waters leaking downstairs I want to replace the rubber o ring seal in the drain

I got a 91 civic I changed the cap dirsderb roter,plugs,wires,valve cover gasket,seal [ 1 Answers ]

I got a 91 civic I changed the cap dirsderb roter,plugs,wires,valve cover gasket,seals,and still the car don't want to run good. Once I turn it on after a few minutes the check engine light turns on then when I drive it I could only pick up the speed to 75mph. When I shift in the gears I can't rev...

How to get to rear valve cover gasket 2001 town&country to replace [ 0 Answers ]

How hard is it to change rear valve cover gasket on 2001 town & country 3.8

Steps to Replace Valve Cover Gasket on 93 F350 7.3L [ 2 Answers ]

My son just picked up a 93 Ford F350 7.3 IDFI w/a leak on the passenger side valve cover gasket. The replacement process looks pretty involved and the dealer wants $270 for that side. Does anyone have any suggestions on what needs to be completely removed vs moved and the steps you would take to...

View more questions Search