 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Water leak from ice maker
I have a Whirlpool Refrigerator Model GS5SHAXNL00. I get a slow water leak running down the outside back of the refrigerator where the water line runs through a plastic inlet to the ice maker near the top of the freezer compartment. The leak usually only happens when the water in the black rubber tube that supplies water to the ice maker gets frozen and the ice maker stops working.
|
||||
|
||||
|
Here are the manuals: https://dl.dropboxusercontent.com/u/...%20Systems.pdf
https://dl.dropboxusercontent.com/u/...e%20Manual.pdf https://dl.dropboxusercontent.com/u/...e%20Manual.pdf https://dl.dropboxusercontent.com/u/...e%20Manual.pdf The water should not freeze in that place, but it should flow through it. It should be set up in such a way that all water is emptied from the tube when the water valve closes. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a water leake at the water line where you tap into for icemaker hook up I punched the hole and now I can not stop the water from leaking. Any ideas
I have a Kenmore Elite Trio model 795.75543401. We are starting to have trouble with a build up of frozen water in the ice maker. No, not in the ice trays like it should be but outside of that - along the back wall mostly so the ice cube tray cannot slide in all the way. We have never replaced...
On my amana refrigerator, the ice maker leaks water at the inlet to the ice maker itself which drips heavily back into the dump tray which freezes the ice cubes all together. I was told the water inlet valve may be at fault. Why? Does the inlet valve have anything to do with the pressure going into...
Recurring problem of water under the refrigerator. This time around I trimmed the edges of both plastic lines out of the dual solenoid valve and reconnected them, and both lines remained dry after I drew water out of the dispenser. When I released the bar in the ice maker the solenoid eventually...
My GE Profile has fresh water and ice maker built-in. The line to the ice maker has popped out of the back of the unit and leaks on the floor. 1. Re-securing it to the refrigerator/freezer has been futile. I may need to defrost, first. Any ideas? 2. More frustrating, the line won't stop...
View more questions Search
|
