Ask Experts Questions for FREE Help !
Ask
    klockhart's Avatar
    klockhart Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 16, 2012, 11:22 AM
    Water leak at water line hook up for ice maker
    I have a water leake at the water line where you tap into for icemaker hook up I punched the hole and now I can not stop the water from leaking. Any ideas
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Oct 16, 2012, 12:01 PM
    You're using a self tapping saddle valve, Either solder up the hole or install a new supply and try again. Good luck. Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to hook up a water line to a GE refrigerator water dispenser [ 1 Answers ]

The water line at the bottom of the freezer dor has snapped into and I need to hook up another water line so the water dispenser will work.

How much does it cost per foot to run a water line and to hook up to public water? [ 3 Answers ]

Barrow County, Ga on a 10 acre piece of property. There is only 40 feet that fronts the main road. The house is about 1500 feet back off the road.

Hook-up Ice maker from washer water line? [ 2 Answers ]

I live in a slab home. Our refrigerator is next to the closet that houses our washer and dryer. The kitchen sink is on the opposite wall. Would it be possible to hook up a water line from the line going to the washing machine for the ice maker? Would that be unsanitary? We don't really have a...

Ice maker water line leak [ 1 Answers ]

My GE Profile has fresh water and ice maker built-in. The line to the ice maker has popped out of the back of the unit and leaks on the floor. 1. Re-securing it to the refrigerator/freezer has been futile. I may need to defrost, first. Any ideas? 2. More frustrating, the line won't stop...

Hooking up water line to refrigerator for ice maker and water dispenser [ 2 Answers ]

Here is my problem, I just bought a refrigerator that has an ice maker and water dispenser which by the way is a Haier PRCS25. I then purchased an ice maker kit from the hardware which came with a self piercing saddle valve. From here I connected the valve to a 3/4" copper cold line pipe...

View more questions Search