Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Main 200 amp. Installing a 200 amp sub-panel. Wire size jumper to connect(2 /100 amp)
[ 1 Answers ]
Installing a 200 amp.sub-pane (type D- Hom), the main panel is 200 amp.also, I'm using 2 /100 amp. Breakers. My question is : what wire size do I need for the jumper to connect the two breakers. I'm using #2 X3 and #4 ground wire to connect the sub-panel, do I need the same#2 for the jumper? Or...
Is 200 amp transfer switch enough for two 200 amp panel
[ 5 Answers ]
Is 200 amp transfer switch is enough for two 200 amp panels to operate a 25ke generator.if the two panels are being inter connected.there is only one supply power from the single meter
Can I downgrade a 200 amp service with a 200 amp main by adding a 100 amp breaker to
[ 1 Answers ]
Can I downgrade a 200 amp service to a 100 amp service by adding a 100 amp breaker to the panel
What size wire to a 200 amp panel 200 feet away
[ 4 Answers ]
What size wire and how much for a 200amp box 200 feet away? I have a 200amp panel on a pole and want to run another box some 200 feet away to a man cave. It will house a fridge, lights, a window ac, and TV stereo. No heat as it will be wood burning stove. Gas oven and cooktop, one big 1200 sq ft...
200 amp main feeding 200 amp sub-panel
[ 13 Answers ]
The utility spotter recommendeds the corner of my house as the location for a 200 amp aerial service entrance/meter base. My county requires a shut-off switch with the meter base, so a combination meterbase and load center is the standard here. I'm okay with her recommended SE location, but... View more questions Search
|