Ask Experts Questions for FREE Help !
Ask
    tdog0328's Avatar
    tdog0328 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 22, 2013, 09:59 AM
    How do I remove a stuck washer from a bathtub faucet?
    My bathtub has very little hot water coming out of the faucet,I checked the washer on it and found that the washer and screw have come off the stem. I need to know how I can remove the washer and screw that are stuck in the faucet.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Sep 22, 2013, 10:07 AM
    With the stem removed, briefly turn on the water. The water pressure should blow the washer and screw out. If it doesn't, start digging around with a sharp pointed tool like an awl. Try to get the washer turned so you can grip it with a pair of long needle nosed pliers. If you move it but can't grip it, try blowing out with water pressure again.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Sep 22, 2013, 11:14 AM
    I have an ice pick with a bent end. Catches the washer and pulls them out.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove a stuck faucet [ 5 Answers ]

This faucet is really old. How do I remove what in the picture. Already tried heat and hammer.

How can I remove a stuck non-threaded plastic nipple for bathtub faucet? [ 1 Answers ]

A contractor left my bathroom remodel job (after installing only the bathtub, a 1/2" off I might add). I am at the point now that I want to install the faucet. The contractor left a piece of PVC (of CPVC?) sticking out of the wall where the bathtub faucet goes. The faucet I have is supposed to...

How can I remove a stuck Moen filter/cartridge from my bathtub [ 1 Answers ]

I have a Moen cartridge/housing within the handle of my bathtub. It's the 1225 cartridge (pull out and turn). However it's stuck in the housing. The plastic tool they included with the new cartridge I bought only gets chewed up; I can't turn the cartridge; it won't budge. I've tried vinegar...

Help getting stuck bathtub faucet off [ 4 Answers ]

I'm assuming that my bathtub faucet is the twist off kind because I don't see any screws. Also it does turn. It turns and turns and turns and never gets any looser. The pipe is not turning either so we think it is striped. Any suggestions. We really want to get it off there.

Stuck trim bathtub faucet [ 2 Answers ]

I'm trying to fix a leaky hot water handle on my bathtub. I can get the handle off, but I cannot get the trim off. It is supposed to just unscrew... but I also cannot get a good grip on it as it has sort of slanted 'edges' that go down to where it connects to the stem assembly. I tried spraying...

View more questions Search