Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What causes a compressor to run backwards on a outside condenser unit model fmb1024
[ 4 Answers ]
Outside cond. Unit making a loud buzzing noise, I replaced the run cap, relay, and fan motor, everything seems to be working properly except the super loud buzzing noise, I made sure everything was tight no loose screws , I even put rubber sound absorbing pads under the unit and its still making a...
Condenser fan
[ 0 Answers ]
2 ton only 3 wires I replaced cap exactly the way it should yet the motor is going backwards. Motor is bad right?
Outside AC condensor/compressor unit not coming on at all
[ 7 Answers ]
My outside central AC condensor/compressor unit (a Lennox) is not turning on at all. When I switch on the thermostat, the blower in the basement starts running and air is coming through the vents, but the outside unit is not turning on at all, so there is no cool air. Is the likely problem a...
Condensor/Capicitor Wiring
[ 1 Answers ]
I have a Bryant Air Condenser Model #539GN060-A and I needed to replace the motor in it along with the capacitor. (I've done this before in another unit and got it to work just fine) So I found the right replacement motor and got it to work just fine using the old capicitor. The problem I am...
Condenser tries to start occasionally
[ 3 Answers ]
I'm a tech w/certification but little field experience. I have central a/c condensing unit that hasn't been in use for 2 years. No refrigerant in system so I partially charged it. Replaced capacitor. Tested contactor and compressor terminals (got readings of about 1, 3, and 4) and both good. ... View more questions Search
|