Ask Experts Questions for FREE Help !
Ask
    tundramax12's Avatar
    tundramax12 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 6, 2013, 09:40 AM
    Kenmore ultra wash dishwasher not pumping water
    I recently took apart my dishwasher to clean all of the build up inside. After putting it back together the dishwasher now won't pump water. Any suggestions?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Aug 6, 2013, 10:15 AM
    First... go back and triple check everything... make sure everything is correctly plugged in.

    First rule when something doesn't work after working on it... go back and check everythiing you touched... its easy sometimes to plug something in and miss a pin or put something in the wrong place.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Aug 7, 2013, 07:24 AM
    See if these help: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
    https://dl.dropboxusercontent.com/u/...ice_manual.pdf
    https://dl.dropboxusercontent.com/u/...ishwashers.zip
    Smoothly is right: You may have missed something like how you plugged in the connectors. You should also check the plug-in connectors because a pin can get pushed back in and will look fine on the outside but will have come loose from plastic housing. I see that all the time where it comes loose where it's supposed to catch in the hole. That's probably what happened.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore ultra wash dishwasher filling up with water [ 1 Answers ]

Hello, I also have a Kenmore ultra wash. Lately it has been filling up with water all on it's own. I made sure my son had not hit any buttons, but even with it locked it did it. I also made sure I didn't use the sink. It also filled up with water then too! If I hit cancel/drain It does drain, but...

Model 665 1376 2K600 kenmore elite ultra wash dishwasher won't pump water [ 0 Answers ]

I have Model 665 1376 2K600 kenmore elite ultra wash dishwasher. When I press the start button I hear the pump start but no water enteres the washer. After a short time the washer stops and then tries again. I have verified that the water supply is available to the first component (looks like an...

Kenmore Ultra Wash Dishwasher model #665.1603, No water coming in [ 0 Answers ]

Kenmore Ultra Wash Dishwasher 665 Pump not working, can't spray water. [ 4 Answers ]

Our dishwasher is only 3 years old. It had been working OK for over 2 years and then it became noisier and noisier. It got to the point where it would fill with water but then the water was not sprayed around inside. We would end up pressing Cancel. We've had 2 different and very experienced...

Kenmore Ultra Wash Dishwasher will not fill with water [ 0 Answers ]

After installing our brand new Kenmore Ultra Wash Dishwasher, the water will not fill. The water valve has been checked and works, as well as the overfill protection float (it moves freely and has been released). Any help would be great! Thank you!

View more questions Search