 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore UltaWash QuietGuard4 START BUTTON
Some of the lights are on so there is power but the START button will not function and washer will not turn on. STA button will not light up and start machine. Anyone had this problem?
Dan Reimer [email protected] |
||||
|
||||
|
Look at this: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
You may need to check the circuit board with a meter and pull it apart where the start button is located and see if water has gotten into it and deposited material that is keeping it from making electrical contact when button is pressed. Cleaning it may cure the problem. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The washer does not start. The start button light keeps blinking green.
Tonight I replaced the Door Switch - easy enough - and the inside light works once again. But now the push button to start the dryer does not work. Do I need to replace the blower box fuse and thermal fuse? What I thought began as a quick fix has now become a mystery. Can You Help ? Model...
I have a Kenmore Ultra Wash dishwasher that will not start when pushing the start pad location. It will pump when put on the Cancel/Drain button, but will not start after that. It does have power, or the pump would not run during the Cancel/Drain cycle. The washer was purchased in Jan 20, 2006...
Kenmore dryer won't start when I push the start button
Please help me with this. My dryer was working good and now it won't start at all.
View more questions Search
|
