 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hunter fans dip switch
I dropped my remote and lost one of the dip switch covers there are four dip switches my remote is part no. 85095 -02 does any one know if hunter sells just one of the small dip switch covers--my remote works fine since I have two fans and I used one of the dip switch covers from my other remote and it works fine---
|
||||
Check out some similar questions!
I have 2 hunter fans w/remotes how do I change 1of the DIP switches in the remote? Do they pull out or something? They do not seem to slide, but I do not want to break it either? They are in rooms next to each other and we keep turning the light on and off on each other?
I have a hampton bay fan (no manual). I need to change the frequency because I'm getting interference from another location. However, I can't find the dip switches on the fan. I removed the canopy and it is just hard wired, with no "receiver". Don't know the model of the fan - its about 10 years...
Does anyone know how to set the dipswitches on a Harbor Breeze remote?
This questions, pertains to the new MVC 95 2 stage gas furnace ( Goodman). On page 41 of the instruction manual, there are speed selection dip switches. In the cooling selection switches column, there is tap 1 and tap 2, the question is... if tap one represents the high speed cooling what does...
Ok, yesterday I learned that to change the frequency on the remote that runs my ceiling fan, I need to adjust the dip switch. Right now, I have two fans that are on the same frequency and when I turn one on, the one in the other room comes on too. So I need to adjust the remote and the canopy? ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
