Ask Experts Questions for FREE Help !
Ask
    kenhig's Avatar
    kenhig Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 26, 2011, 04:47 PM
    Dip switch location
    I have a hampton bay fan (no manual). I need to change the frequency because I'm getting interference from another location. However, I can't find the dip switches on the fan. I removed the canopy and it is just hard wired, with no "receiver". Don't know the model of the fan - its about 10 years old. The model on the remote is UC7078T.

    Thanks for your help.

Check out some similar questions!

Harbor Breeze dip switch setting [ 3 Answers ]

Does anyone know how to set the dipswitches on a Harbor Breeze remote?

Goodman dip switch [ 0 Answers ]

This questions, pertains to the new MVC 95 2 stage gas furnace ( Goodman). On page 41 of the instruction manual, there are speed selection dip switches. In the cooling selection switches column, there is tap 1 and tap 2, the question is... if tap one represents the high speed cooling what does...

The dip switch on a remote control [ 2 Answers ]

Ok, yesterday I learned that to change the frequency on the remote that runs my ceiling fan, I need to adjust the dip switch. Right now, I have two fans that are on the same frequency and when I turn one on, the one in the other room comes on too. So I need to adjust the remote and the canopy? ...

Tempstar Air Handler Dip Switch Settings [ 5 Answers ]

We have a 3.5 ton Trane heat pump with a 4 ton Tempstar variable speed air handler (both units new in 2004). In January we were told that "all the dip switches were OFF"; so they had to have been that way since the unit was installed. The air flow has always been too strong so, at our request,...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.