Ask Experts Questions for FREE Help !
Ask
    campden's Avatar
    campden Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 11, 2013, 01:42 PM
    Tub taps after tiling
    We just had tub area tiled and our moen adler handles won't go on the stems are 1/2 inch approx short how do we fix it?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    May 11, 2013, 01:46 PM
    Hi Campden

    You call Moen at 1800BUYMOEN and you ask to speak with the technical department... see if they make extension pieces for your particular valve... ;)

    Good luck!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

We have a 55 year old house and the tub/shower taps are leaking.Both from the tub and [ 2 Answers ]

We have a 55 year old house and the tub/shower taps are leaking.Both from the tub and shower spouts.I have replaced the seats and rubber washers on the stems.With the taps closed it still leaks.Then I turned the diverter and it slowed the leak to a trickle from both spouts?! Any ideas ? Do I...

Tiling around tub [ 1 Answers ]

I will be putting porcelain tile around a tub. The depth of the tub is 28" and I have 13" tiles. How would be the best way to arrange the tiles? If I use 2 large tiles from the end of the tub back towards the wall that would only leave a very small cut tile on the inner corner. Would this look...

Tiling over a tub [ 8 Answers ]

I'm just about ready to install tile over a fiberglass whirlpool tub. I've put up the durock, taped the seams with their fiberglass tape and thinset. One of the durock walls butts up to sheetrock and is a bit lower than the sheetrock. Not thinking ahead, I mudded the gap and smoothed the transition...

Tiling next to a tub [ 4 Answers ]

My buddy is doing some work on his bathroom and he's running into a jam with his tub. When his 1-piece tub was installed 20 years ago, the floor was tiled underneath the tub and there is a gap between the floor and the base of the tub. The owners put one of those cheap rubber adhesive strips down...

Tiling the tub walls [ 3 Answers ]

OK, before I can get to making my rec room, I need to remoldel the washroom so now I'm tiling the floor and the walls inside the tub. I bought 4 sheets of DUROCK dry wall, I believe that I should insert the tub and fasten it to the studs, making sure my tub is level and whatnot, then hang the...

View more questions Search