Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tiling over a tub
[ 8 Answers ]
I'm just about ready to install tile over a fiberglass whirlpool tub. I've put up the durock, taped the seams with their fiberglass tape and thinset. One of the durock walls butts up to sheetrock and is a bit lower than the sheetrock. Not thinking ahead, I mudded the gap and smoothed the transition...
Tiling next to a tub
[ 4 Answers ]
My buddy is doing some work on his bathroom and he's running into a jam with his tub. When his 1-piece tub was installed 20 years ago, the floor was tiled underneath the tub and there is a gap between the floor and the base of the tub. The owners put one of those cheap rubber adhesive strips down...
Tiling around jetted tub
[ 1 Answers ]
I have recently re-done the walls in my masterbath. I have a jetted tub that had carpet around it. I removed the carpet and found a plywood base. I would like to install floor heat and tile the floor, as well as tile the surround around the tub and part of the walls. Do I need to put cement...
Tiling behind Toilet
[ 1 Answers ]
Homeowner remodeling a bath. Installing a new Kohler toilet and would like to also tile the wall behind it with half inch marble tile. Concern is that there may not be enough room behind the toilet to do this. I have a 12 inch rough-in but when I measure the EXACT distance from the center of the...
Tiling
[ 1 Answers ]
I am remodeling my first bathroom. I am planing on tiling the shower/tub.. my question is the transition from tile to painted wall.. with the cement backer do I butt it up to drywall? What do I do about the seam? Mud and tape? View more questions Search
|