 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hi Name1
Yes, that is a called a piezo ignitor (in most cases) and can be purchased through the manufacturer or one of its distributers. I would suggest calling the manufacturer and ask them how to proceed... may even fall under a parts warranty, so be sure to have the model number and the serial number (from the tag on the front/center of heater) handy, just in case! Good luck! Mark |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am trying to find a programmable thermostat that I can install on my gas heated hot water baseboard heating system. I currently have double pole Dimplex (models td902w & td902) and Mears thermostats with dials on them. I would like to switch them to a digital/programmable model. What can you...
This is a gas hotwater heater with an electric ignition. It states it is not to be lit manually. It lites on demand for hot water and it is trying to lite but will not catch. I have read that it could be a faulty therm coupler. There is gas supply to the rest of the house, heater is 4 to 5...
I am in the market for a good used self-propelled gas mower but would really like it to have electric start. Is it possible to add this feature to a gas mower? How complicated would it be?
I just changed out my hot water heater yesterday and have low pressure (hot and cold) in one bathroom and an outside outlet. The bathroom had low pressure in comparison with the other bathroom for quite some time but now can hardly fill the pipes for a shower. The outside has never had any issues....
Can someone tell me if I can by pass the control board on my electric Whirpool hot water heater. I have a new C. B. coming Tuesday, but I would like a shower before then. I have the red,black and white wires coming in and there is a blue,orange and yellow going out of the control box to the...
View more questions Search
|
