Ask Experts Questions for FREE Help !
Ask
    mommaroozey's Avatar
    mommaroozey Posts: 3, Reputation: 1
    New Member
     
    #1

    Apr 8, 2013, 06:42 AM
    Boiler breakdown
    I have combination boiler installed about seven yrs ago. Had no probs until now. Boiler not firing when required. I have no hot water or heating. What would cause this?

Check out some similar questions!

Boiler breakdown [ 3 Answers ]

I have combination boiler installed approx 7 yrs ago. Never had prob till now. Boiler stopped firing. No hot water no heating. What could cause this?

Repco boiler model #LA150c pressue in boiler too high [ 1 Answers ]

Pressure rellief valvue was replaces a year ago for laking. Water pressue still reaching 40psi? Don't know why shoud be 30psi.. water still leaking off from the pressure relief valvue. I've tried to beeed oof water from the pressure relief valvue and the drain with n help. Pressuet still moves...

Oil boiler switch to gas boiler [ 0 Answers ]

I have a 1940's oil furnace with original radiator (built in fin tube with steel, radiator size covers) I want to switch to high efficiency natural gas. Are there any "Don'ts" that I should be aware of? I want to get a combination system and replace my electric water heater also. Is an instant hot...

Spark ignition gas boiler Weil McLain pilot lights but boiler doesn't s [ 2 Answers ]

Spark ignition gas boiler. Weil McLain gas boiler. The pilot lights but the boiler doesn't start.

Is my hobart 600 a steam boiler or a hot water boiler. There is no circulator pump [ 0 Answers ]

I have a Hobart 600 automatic gas fired furnace. The first thing is I cannot see a circulater pump or a air tank. I can not tell if it is steam or hot water. When I go to fill the system with water, the system fills and then the water continues to flow out to the drain pipe.


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.