 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Water pump goes on and off when using shower
I have a watermill shower pump which is linked to upstairs taps and upstairs mixer shower. The pump manages the hot and cold water and is enabled when either tap is turned. The taps work great and the pump turns on and the then off when the tap turned off. When we use the shower the pump goes on and off. When off there is still water coming out of the shower and then 4 seconds later (not timed! ) the pump comes on again. To have a constant shower I have to turn on the cold tap in the bathroom to have a constant shower.
Hope someone can help. I a good DIY er but not an expert ! |
||||
Check out some similar questions!
I have a shower/steam cubicle with overhead, handheld spray and back jets. I had a plumber fit a Wickes 1.5 bar twin impeller booster pump and all worked well for 2 yrs until my pump started leaking. I went to Wickes and bought an identical pump but when the plumber fitted it there was no hot...
Hello I installed a new shower pump today. After completing the installation and turning the water back on, there is no water running from any hot water tap in the house. Do you think I have an airlock? Any other possibilities? I have tried to get rid of the airlock with the 'length of hose'...
I turned the water off and drained to change the kitchen tap but now the power shower has no water, is this a air lock and how do I get it working. Cheers
I have 3 cenreifugal pump which are used for the condenser cooling water recirculation, may I could use it as a chilled water pumps and get another smaller pumps for cooling water recirculation, thank u in advance.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
