Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Repco boiler model #LA150c pressue in boiler too high
[ 1 Answers ]
Pressure rellief valvue was replaces a year ago for laking. Water pressue still reaching 40psi? Don't know why shoud be 30psi.. water still leaking off from the pressure relief valvue. I've tried to beeed oof water from the pressure relief valvue and the drain with n help. Pressuet still moves...
Spark ignition gas boiler Weil McLain pilot lights but boiler doesn't s
[ 2 Answers ]
Spark ignition gas boiler. Weil McLain gas boiler. The pilot lights but the boiler doesn't start.
Is my hobart 600 a steam boiler or a hot water boiler. There is no circulator pump
[ 0 Answers ]
I have a Hobart 600 automatic gas fired furnace. The first thing is I cannot see a circulater pump or a air tank. I can not tell if it is steam or hot water. When I go to fill the system with water, the system fills and then the water continues to flow out to the drain pipe.
New boiler fitted and now have a leak in waste pipe from bathroom
[ 0 Answers ]
We have recently had a new boiler fitted by a gas safe engineer and we have noticed our extension roof has gone brown since this has been fitted and also the waste pipe from the bathroom looks like a leak causing the extension roof to to disfigure. Need help to try and figure this out before the...
Utica boiler water glass tube leak
[ 2 Answers ]
Hi, and thanks for your time. I've a Utica boiler that I replaced the water glass tube a couple of years ago, and it's been working fine. Now the darned thing leaks from the bottom of the tube,:mad: requiring me to refill the tube a few times a week. :( I've tried loosening and relocating the tube... View more questions Search
|